Man-Made Boards, Veneers and Wood Finishes

Man-Made Boards

There are many different types of Man-Made boards, made up from things varying from chippings to fibres. The most commonly used size of board available to buy in a shop is 2440mm by 1220 mm then the thickness is decided by the Manufacturer going up in steps of 3mm starting at 3mm and going up to a large but theasable amount.

All the boards below are Man-Made.

Plywood is made up from alot of different layers of wood with all their drains facing in different directions to counteract eachother therefor making the wood strong in all dfirectiong rather than if the grains were all facing the same way where the wood would be strong along the grain but weak across it. Plywood gets its strength from the direction of its grains.

Marine Plywood is named so because it is more resilient against wateras it has a layer of plastic based paint coating it which seals off all the fibres and stops water getting into the wood.

Mdf stands for Medium Density Fibreboard, it is made up from fibres from wood which are all added together and pulped down like paper is and then an extremely strong adhesive is added to it and then a certain amount of pressure is applied. Hdf stands for High Density Fibreboard which is the same process as from MDF except more pressure is applied to the board making it denser.

Both MDf and HDF have adhesive in them, the adhesive which is harder than the wood itself gives the wood blunting properties so if MDF was to be used in a large scale production there would be a cost implication as the saws will often get blunt or broke.

Hardboard is alot cheaper than Plywood as the strength of Plywood isn't needed in Hardboard therefore it doesnt need as many layers or the layers to be arranged in the same fashion which means that Hardwood is one of the cheapest types of Man-Made Boards available. Hardboard is weak,brittle and is very absorbant to water and because of that is often used to fill in gaps. It is most commonly used as the back of furniture. If Hardboard does get wet the fibres within it will suck up the liquid and then make the wood rotten and useless.

Chipboard is most commonly used for kitchen worktops and units and etc. Chipboard is made of big wood chippings and is made using a similar process as MDF or HDF by pulping the chippings together then adding adhesive and pressure. Chipboard usually has a Veneer or Laminate on top to make the material look more attractive by hiding the chipboard underneath.

Blockboard is made from a different process to ensure it has good aesthetical properties. Long strips of cheap and otherwise useless wood are glued together between two Veneers who give the material its aesthetical properties. The Veneers are what cost the most money in making Blockboard.

Aeroply is used in the structure of plane wings. The material is made in a way which gives it the properties making it capable of bending around objects or frames.

Maplex is like a higher grade of MDF board used for furniture. It is new and easier to machine. It is high density and made up from pure wood fibres, Maplex is a new material and looks and acts alot like sheet metal.

Veneers

Veneers are basically a slice of wood ranging from 1.5mm to 4 mm thick. They are usually used by being glued to less attractive Man-Made boards such as chipboard and they used in more affordable furniture or kitchen.

There are two main types of Veneering ; Slice Veneering and Rotary Veneering.

Slice Veneering is involving a piece of wood that is is usually raised and lowered against a blade, thus then slices of the log are made. this makes the veneer have some marks of growth rings on it. This gives a decent decorative pattern which can be used for a variety of uses and is cheaper to make therefore buy compared to Rotary Veneering.

Rotary Veneering uses a rotary lathe in which the wood is turned against an extremely sharp blade and then peeled off like the skin of an orange. Rotary-cut veneers are mainly used for plywood because the appearance isn't great or nice like it is if slice veneered.

Wood Finishes

All Wood is finished in some way or another.

Polyurethane Varnish is a plastic based varnish that can be bought in matt, satin or gloss finish and it keeps the water out of the wood as it is plastic based

wood stain = colours the wod

wood oils are rubbed into the wood and is usually used for furniture.

preservatives can make the woods life 4 or 5 times longer and is generally used in outdoor furniture